Are your Oraimo FreePods 3 acting up, refusing to connect, or simply not working as they should? Don’t fret; there’s a good chance that a reset could fix those pesky issues and have your earbuds working again. So, in this guide, you’ll learn how to reset Oraimo FreePods 3, step by step.
Quick Tip: To reset Oraimo FreePods 3, first, make sure they are powered off. Then, press and hold both earbuds’ touch-sensitive areas for about 10 seconds until you see the LED indicators blink in red and white.
Mind you, there are some facts you should know before resetting the FreePods. You’ll understand them all as you read further.
Why Reset Your Oraimo FreePods 3?
Resetting your Oraimo FreePods 3 can be a handy troubleshooting step when you encounter problems like:
- Connectivity issues (difficulty pairing with devices).
- Unresponsive touch controls.
- Poor sound quality.
- Unexpected glitches or erratic behavior.
A reset can often resolve these issues and give your earbuds a fresh start. Now, let’s dive into the reset process.
How To Reset Oraimo FreePods 3 [Method 1]
Here’s a step-by-step guide on how to reset your Oraimo FreePods 3:
Step 1: Charge the Devices
Before you begin the reset process, ensure that your FreePods and their charging case have sufficient battery charge. This will prevent any interruptions during the reset processes.
Step 2: Put the Earbuds Back into the Charging Case
Place both of your earbuds into their charging case. Make sure they are seated properly and are making contact with the charging pins.
Step 3: Close the Charging Case Lid
When attempting to reset your FreePods, it’s also important to close the lid of the charging case securely. This step is crucial, as it triggers a specific reset mode in the earbuds.
Step 4: Perform a Reset
Here comes the magic part. To reset your Oraimo FreePods 3, follow these steps:
- Open the charging case lid.
- Press and hold the touchpads on both earbuds simultaneously. Hold them for about 10 seconds or until you see the LED indicator lights on both earbuds flash red and white. This indicates that the earbuds have entered reset mode.
- Release the touchpads and wait for the LED to turn off. This shows that your earbuds are now in reset mode.
- open the Bluetooth settings of your device and forget the “Oraimo FreePods 3” connection.
Step 5: Reconnect the Earbuds
Now that you’ve successfully reset the FreePods, it’s time to pair them with your device again. Here’s how to do it:
- With the charging case lid open, press and hold both touchpads on the earbuds for 5 seconds. The earbuds will enter pairing mode, indicated by flashing LEDs.
- Open the Bluetooth settings on your smartphone or device.
- Look for “Oraimo FreePods 3” or a similar name in the list of available devices.
- Tap on the Oraimo FreePods 3 option to initiate the pairing process.
- Once the pairing is successful, you’ll hear a confirmation sound in the earbuds, and they will be connected to your device.
For a more detailed guide, see how to connect Oraimo FreePods 3.
How To Reset Oraimo FreePods 3 [Method 2]
This is a manual reset option, useful when you’re without the FreePod’s charging case. It involves the following steps:
- Make sure the earbuds are off and not in the charging case.
- Press and hold both touchpads on the earbuds simultaneously for 10 seconds. The earbuds will turn off, then turn on again with flashing LEDs.
- Release the touchpads and wait for the LEDs to turn off. This indicates the reset is complete.
Once you’re done with the reset, repeat step 5 in method 1 to reconnect the FreePods with your device.
Troubleshooting Tips for Any Oraimo FreePods 3 Reset Issues
Resetting your Oraimo FreePods 3 is usually a straightforward process, but if you encounter any issues along the way, here are some troubleshooting tips:
a. Earbuds Not Entering Reset Mode
If your earbuds aren’t entering reset mode, do these:
- Make sure the earbuds are properly placed in the charging case and that the lid is securely closed.
- Ensure you are pressing and holding the buttons on both earbuds simultaneously for the full 10 seconds.
b. Connectivity Issues Post-Reset
If you’re still experiencing connectivity issues after the reset, try:
- Double-check that Bluetooth is enabled on your device.
- Forget the Oraimo FreePods 3 from your device’s Bluetooth settings and then attempt to pair them again.
c. Touch Controls Not Responding
If the touch controls on your Oraimo FreePods 3 are unresponsive, do these:
- Ensure the earbuds are connected to your device.
- Clean the touch-sensitive surfaces of the earbuds to remove any dirt or debris that might be affecting their responsiveness.
If you often encounter issues with this device, you might need to check out our guide on how to use the Oraimo FreePods 3.
Final Thoughts
And there you have it – a step-by-step guide on how to reset Oraimo FreePods 3. Resetting can be a lifesaver when you encounter issues with your earbuds, and it’s often the first step recommended by customer support.
Remember, technology can be finicky at times, but with a little know-how, you can quickly get your devices back on track. So, whether you’re looking to fix connectivity problems or resolve touch control issues, this guide has you covered.
Now, grab your Oraimo FreePods 3, follow these steps, and enjoy your music without the hassle of technical glitches.
Related: How to turn on Edifier earbuds.