How to Turn On Edifier X3 [Step-by-Step Guide]

So, you’ve got your hands on a pair of Edifier X3 earbuds, and you’re excited to immerse yourself in the world of wireless audio. But there’s just one little hiccup – you’re not quite sure how to turn them on. Don’t worry; you’re not alone! This guide will guide you through how to turn on your Edifier X3 earbuds, step by step.

Quick: To turn on your Edifier X3, take it out of the charging case to automatically activate it. You can also press and hold the touch-control area on either earbud for 2 seconds or until you see the LED indicator light up.

Keep reading to learn more and access a full guide.

Table of Contents

Setting Up & Unboxing Your Edifier X3

Before we show you a full guide on how to turn on your Edifier X3 earbuds, let’s quickly go over the initial setup. This will ensure everything is in place for a smooth start.

1. Unboxing the Edifier X3

When you first open the box containing your Edifier X3 earbuds, you’ll typically find:

The Edifier X3 earbuds themselves.
A charging case.
A USB cable for charging.
Extra ear tips in various sizes for a comfortable fit.
User manuals and documentation.

Make sure you have all these items handy before moving forward.

2. Charging the Earbuds

Before you can turn on the earbuds, it’s crucial to ensure they have sufficient charge. Here’s what you need to do to charge the device for the first time:

Place the earbuds inside the charging case.
Connect the charging case to a power source using the provided USB cable.
Let the earbuds charge for at least 30 minutes to an hour. This gives them ample power to function.

How To Turn On Your Edifier X3 Earbuds [Step-by-Step Guide]

Now that we’ve covered the initial setup, let’s get to the main event. Here’s a step-by-step guide on how to turn on your Edifier X3 earbuds:

Step 1: Remove the Earbuds from the Charging Case

To begin, take the earbuds out of the charging case. As you remove each earbud, it’ll automatically switch on. However, because the earbud can go off after a long, inactive period (around 5 minutes or more), you may need to know how to switch it on manually.

That leads us to step 2.

Step 2: Power On the Earbuds

Again, please note that while your Edifier X3 will automatically turn on when you remove them from the case, you can also turn them on without the case. As long as the earbuds have power, you can turn them on with the touch-sensitive buttons on their side.

Here’s what you need to do to power on your Edifier X3 when they are not in the case:

Locate the button on one of the earbuds (either left or right; it doesn’t matter which one you start with).
Press and hold the button for a few seconds until you see an LED indicator light up. This light indicates that the earbud is powering on.

Repeat this process for the other earbud to ensure they are both powered on. You’ll typically see a flashing blue and red LED light, indicating that the earbuds are in pairing mode.

Step 3: Pair Them With Your Device

Now that the earbuds are powered on and in pairing mode, it’s time to connect them to your device. This is where you can enjoy your music or take calls wirelessly.

Here’s what you need to do on your smartphone or other Bluetooth-enabled devices to pair them with your Edifier X3 earbuds:

Open the Bluetooth settings on your device. This is usually found in the settings menu under “Connections” or “Bluetooth.”
Look for available devices. You should see “Edifier X3” or a similar name in the list of available devices.
Tap on the name to initiate the pairing process.
Once the pairing is successful, you’ll hear a confirmation sound in the earbuds, and the LED indicators will stop flashing. Your X3 earbuds are now paired and ready to use.

Make sure you check out our guide on how to pair Edifier earbuds to phone if you need a full guide on this.

Adjusting the Volume and Controls of Edifier X3 Earbuds

Your X3 earbuds come with built-in controls for adjusting the volume, skipping tracks, and managing calls. Here’s a quick guide on how to use these controls:

Volume Control: To adjust the volume, press the button on the left earbud to decrease it and the button on the right earbud to increase it.
Playback Control: To play or pause music or answer and end calls, tap the button once on either earbud.
Skip Tracks: You can also skip tracks and move to the next one with the button. To do this, double-tap the button on the right earbud. And to go back to the previous track, double-tap the button on the left earbud.

Troubleshooting Tips for Edifier X3 Earbuds

Sometimes, despite your best efforts, you might encounter issues when turning on your Edifier X3 earbuds. Here are some troubleshooting tips to help you out:

a. Edifier X3 Earbuds Not Powering On

If your Edifier X3 earbuds are not turning on, do these:

Check the charging case to ensure they have sufficient charge.
Make sure you’re holding down the power button on each earbud for a few seconds until the LED indicator lights up.

b. Pairing Issues With the Earbuds

If you’re having trouble pairing the Edifier X3 earbuds with your device, try the following:

Ensure your device’s Bluetooth is turned on.
Try disconnecting and forgetting the earbuds from your device’s Bluetooth settings, then start the pairing process again.
Make sure the earbuds are in pairing mode (flashing blue and red lights).

| You might also want to check out why Oraimo AirPods are not connecting together.

Final Thoughts

I believe you now know how to turn on your Edifier X3 earbuds. With this knowledge, you can now enjoy the freedom of wireless audio, whether you’re on the go, working out, or just relaxing at home.

Remember, technology is meant to enhance our lives, and these earbuds do just that by providing you with a high-quality audio experience. If you ever encounter any issues, don’t hesitate to refer back to this guide for troubleshooting tips.